Easy Manual Cleaning
Hump Magnets have two Bunting Plate Magnets hinged and gasketed to the rugged steel housing. These plate magnets unlatch and swing open for quick manual cleaning.

Self-Cleaning Hump Magnets
Pneumatic control provides safe, easy operation. Cleaning takes only seconds to complete. With the product flow temporarily shut down, the magnets and a pneumatic discharge gate swing back to release the tramp iron collected through a special discharge chute. Magnets and gate then return to operating position so that processing can resume. Bunting can provide a complete pre-engineered control package for proper sequencing of the cleaning cycle. Contact a Bunting sales engineer to discuss this important option.

You can locate self-cleaning separation equipment where it will work most efficiently - where product velocity and depth of flow are lowest - without considering accessibility. Your operator need not handle magnets in remote or awkward location. Self-Cleaning Humps can save your operator time and down-time.

Specifications
General material - Utility Grade Humps are 12 ga. mild steel with 1/4'' thick flanges. Optional 13 ga. 302/304 stainless steel with 1/4'' thick flanges. Self-cleaning models have stainless steel panels at magnet locations. Powder, Food, and Sanitary Grade Humps are constructed of 20 ga. mild steel and optional 11 ga. stainless steel.
Optional adapters - 12 ga. mild steel with 1/4'' thick flanges. Optional 302/304 stainless steel with 1/4'' thick flanges. Magnet material - High-density Ceramic permanent magnets. Rare Earth magnets are also available.
Magnet design - Bunting Plate Magnets with stainless steel faces. Pole plate face is standard.
Construction - Housing is seam welded into an integral, totally enclosed unity. Magnets furnished with hinge, gaskets, and latch.
Contaminant removal - Ferrous fragments, nuts, bolts, and miscellaneous tramp iron such as wrenches, screwdrivers, hammers from free-flowing, clumping, or bridging-type materials.
Method of cleaning - Manual, from outside of hump housing by swing-away magnet hinge and latch. Self-cleaning units use pneumatic cylinders and controls.
sizes - Available from 6'' through 48''. Uses - May be directly mounted in spouting or on processing machines.

How to Select Hump Magnets
Use the table to find the Hump or Half-Hump Magnet that comes closest to matching your spouting or inlet dimensions. Find your spouting size in the table and select the corresponding Hump Magnet.

This table is calculated for typical flow rates for the listed spouting sizes. To select a magnet for low flow rates or special applications, consult a Bunting sales engineer. Be sure to specify your choice of magnetic face, magnetic material, self-cleaning option, and construction grade when you order.

Standard and Self-Cleaning Hump Magnets
Dimensions in inches. Sizes of spouting adapters are approximate.

Specifications
General material - Utility Grade Humps are 12 ga. mild steel with 1/4'' thick flanges. Optional 13 ga. 302/304 stainless steel with 1/4'' thick flanges. Self-cleaning models have stainless steel panels at magnet locations. Powder, Food, and Sanitary Grade Humps are constructed of 10 ga. mild steel and optional 11 ga. stainless steel.
Magnet material - High-density Ceramic permanent magnetic material. Rare Earth models are also available. Magnet design - Bunting Plate Magnets with stainless steel faces. Pole plate face is standard.
Construction - Housing is all seam welded into an integral unit. Magnets are hinged to swing open for cleaning and sealed closed using a latch and silicone gasket.
Method of cleaning - Manual, from outside of housing utilizing hinged magnet and latch. Self-cleaning option available.
sizes - Available from 6'' through 48''.

Standard and Self-Cleaning Half-Hump Magnets
Dimensions in inches. Sizes of spouting adapters are approximate.