500 S. Spencer Road
P.O. Box 468
Newton, KS 67114-0468
(800) 835-2526
(316) 284-2020
bmc@buntingmagnetics.com
Quote Request Transmittal - Standard & Medium Duty Conveyors
Company: 
Address:
City:
State/Province:
Country:
Zip:
Contact:
E-Mail:
Website:
Phone:
Fax:
CC:
Due Date:
Project Reference:
Conveyor Specifications/Description
1. Standard Duty Conveyor (6-1/2" Frame)
  Medium Duty Conveyor (3-1/2" Frame)
  Other
2. Magnetic
  Non-Magnetic
3. Horizontal
  Incline
        30° 40° 60° 75° 90°
        Curved Corner Section
        Pulley Corner Section (75° & 90°)
        By Engineering
  Special Features/Options (fixed end terminal, center take-up, etc.)
4. Overall Conveyor Length
  Overall Conveyor Height
  Infeed Elevation
  Discharge Elevation
  Overall Frame Width
  Belt Width
  Style/Type
  Stainless Steel Lacing Endless Construction
5. Side Guards
  No Guards / By Customer Spill Guards
  Z Guards Can Guides
  Other
6. Supports (By BMC unless noted)
  Infeed Discharge
  Ceiling Channel Ceiling Channel
  Floor Floor
  By Customer By Customer
  Special conditions regarding conveyor support or erection
Note: For conveyors regarding ceiling and/or special support locate on sketch permissible support location.
7. Drive Location
  a. End Drive Center Drive RH
  b. Top Drive Bottom Drive LH
  c. Other:
8. Drive Motor & Power Specifications
By Customer TEFC Explosion Proof
Constant Speed Variable Speed
    FPM/to
Preferred Manufacturer:
Model/Specs: HP
115V, 1PH 230V, 1PH 230/460V, 3PH
60 Hz 50 Hz Other V PH Hz
Optional: Clutch/Brake
                  Other
9. Electrical Control & Power Specifications
  By Customer
  Toggle Switch (w/15' Cord & Plug 115V 1PH)
  Motor Starter Only (3PH)
  230V    460V
  Motor Starter (w/ Integral Push Buttons 3PH)
  230V    460V
  Variable Speed DC Controller (1PH)
  115V   
  Other
  V   PH   Hz
  Control Enclosure
  Nema 1 General Purpose (Standard)
  Nema 4 Water Tight
  Nema 12 Dust Tight
  Other
  Components Shipped
  Loose   Mounted & Wired
(sketch location)
10. Electrical Control & Power Specifications
  T-Rails Plate Rails
  800 Series 700 HD Series
  600 Series 700 XHD Series
  900 Series Alternating Polarity
  Other
  By Engineering
  Magnetic Lanes
  Single Row
  Two Rows @ centers
  Three Rows @ centers
  Four Rows @ centers
  Other
  By Engineering
11. Paint
  Conveyors
  Bunting Precaution Blue
Other
  Guards
  Precaution Orange
Other
12. Special conditions regarding fabrication, drive components or delivery
 
 
Product Specifications/Description
1. Product Handling    Scrap Handling
2. Ferrous    Non-Ferrous
3. Shape
  Round    Square
  Other
4. Maximum Material Size
  Length
  Width
  Height
  Minimum Material Size
  Length
  Width
  Height
 
  Weight @ maximum
    @ minimum
 
  Sample Submitted?
5. Orientation
  Not Required    Required (Describe)
6. Is material damange a concern?
 
7. Material Surface Condition
  Soft Abrasive Sticky
  Wet Smooth Oily
  Dry Hot °F
  Other
Please download the PDF below to provide a part drawing.
PDF Drawing Grid
RFQ Prepared By:
Application/Environment Specifications
1. Explain Preceeding Operation
  How are parts loaded onto conveyor?
  Manual Vibratory Feeder
  Chutes Machine (Type)
  Other
2. Part Feed Rate
  parts/min   parts/hr
  Machine Cycle Rate
  cycle/min   cycle/hr
parts/cycle
  Product Flow
  Continuous
Intermittent (Describe)
  Special Conditions (accumulation, start/stop, etc.)
3. Explain Following Operation
4. Conveyor Location
  Inside   Temperature
Outside
5. Abnormal Conditions (freezer,heat,washer,etc.)
6. Are Engineering Drawings Required with quote?
  Note: Approval drawing will be sent after receipt of order.
Please download the PDF below to provide an application drawing.
PDF Drawing Grid