Specifications
MFC Fixed-Base Models
For stationary applications, the Bunting® Medium-Frame Conveyor can be ordered as a fixed-base unit. Two sets of medium-duty supports provide up to 9 inches of height adjustment and a maximum incline of 40 degrees. this MFC is deal for applications in which the conveyor will be stationary for long periods of time.
MFC Standard Belt
Model GP210
- General purpose belt, good coefficient of friction at surface, used primarily on MFC
- 2-plygreen PVC belt
- Polyester fabric, antistatic
- Surface is smooth with a .039’‘ thick urethane cover
- Admissible tensile force is 90 lbs. per inch
- Total belt thickness is .093 inch
- Maximum operating temperature is 176° Fahrenheit
| (W) Frame width | Overall Length (L) | ||||
| - | 2’ | 4’ | 6’ | 8’ | 10’ |
| 2” | MFC 020-2 | MFC 020-4 | MFC 020-6 | MFC 020-8 | MFC 020-10 |
| 4” | MFC 040-2 | MFC 040-4 | MFC 040-6 | MFC 040-8 | MFC 040-10 |
| 6” | MFC 060-2 | MFC 060-4 | MFC 060-6 | MFC 060-8 | MFC 060-10 |
| 8” | MFC 080-2 | MFC 080-4 | MFC 080-6 | MFC 080-8 | MFC 080-10 |
| 10” | MFC 100-2 | MFC 100-4 | MFC 100-6 | MFC 100-8 | MFC 100-10 |
| 12” | MFC 120-2 | MFC 120-4 | MFC 120-6 | MFC 120-8 | MFC 120-10 |
| 18” | MFC 180-2 | MFC 180-4 | MFC 180-6 | MFC 180-8 | MFC 180-10 |
| 24” | MFC 240-2 | MFC 240-4 | MFC 240-6 | MFC 240-8 | MFC 240-10 |
| 36” | MFC 360-2 | MFC 360-4 | MFC 360-6 | MFC 360-8 | MFC 360-10 |
Standard Specifications
Magnetic and Nonmagnetic Models
Belt – Standard 2-ply green PVC general-purpose belt is antistatic and can handle 90 lbs per inch tensile force and temperatures to 176 degree Fahrenheit. With urethane cover layer, total belt thickness is .093 inch.
Dimensions – Overall length of the unit ranges from 2’ to 12’.
Slider Bed – 16 gauge 300 series stainless steel on magnetic models. Mild steel or stainless steel on nonmagnetic models.
Magnetic bed – BM 600 single-lane magnetic element. Multiple lanes and other magnetic elements are available.
Snub rollers – 2 1/2’‘ dia. x 11/16’‘ hex axle with adjustable mounting clips.
Take-up pulley – 3’‘ dia. crowned face with 1’‘ dia. CRS shaft and sealed precision ball bearings.
Take-up – Flat side design, internally mounted screw adjustment. Allows for a take-up adjustment of 4’‘.
Drive bearing – Self-aligning, heavy duty, sealed precision ball bearings.
Drive – Standard 70 fpm, 1/3 hp, 115 V, 1 Ph, 60 hz, heavy duty TEFC incline gearmotor. Other motors are available on request.
Belt speed – Constant or variable speeds to 250 fpm.
Motor mounting – Standard bottom-mounted under conveyor. Optional above-belt location can be ordered at no extra charge.
