Get Permanent SlideTrack™ Chain Lubrication
The rugged twin-roller drive chain that holds and moves the magnets runs in an oil-impregnated SlideTrack channel. Our SlideTrack channel is made of ultra-high-molecular-weight polyethylene (UHMWPE) to provide continuous lubrication, reduced friction and noise, and exceptionally long chain service. To extend chain life even more, each MagSlide® has built-in oil fittings that permit manual or automatic supplemental oiling.
Supplemental oil fittings allow the use of manual or automatic oilers to extend chain life.
Drives can be mounted left or right and rotated in 45-degree increments to avoid obstructions.
MagSlide® Low-Profile Conveyors
Height: Conveyor frames are 3 1/8” high; additional clearance needed for parts or scrap.
Frame Widths: 4”, 6”, 8”, 10”, 12”.
Lengths: Std. 2’-10’ lengths in 1’ increments and custom lengths.
Guidework: Oil-filled UHMW chain guide provides continuous lubrication; automatic or supplemental oil fittings are provided to further increase chain life.
Magnets: Std ceramic on 12” c/c, custom Rare Earth magnets for special applications.
Sliderbed: Rigidized textured stainless steel designed for transfer of oily slugs and scrap is standard.
Sideguides: Std 1/2” high integral sideguides, additional chutes, guides, hoppers, and liquid tight construction available upon request.
Drive: Std flange-mounted hollow shaft reducer and 1/4 hp, 115v, 1ph motor providing 44 fpm. Options include drive type, drive position, and drive speeds.
Supports: Optional floor supports, brackets or mobile base to customer specifications.
Controls: Optional toggle switch for 1ph drives and pushbutton starter for 3 ph drives; controls supplied either pre-wired, mounted, or shipped loose.
Take-Up: Manual chain tensioning at infeed.
Other Specifications and Options: See Model Designation chart.
MagSlide® Low-Profile Model Designation
Use this chart to describe the conveyor you need when discussing or selecting options, ordering, or requesting quotes.
| Width(in) | Length(ft) | Drive Type | Drive Side | Drive Speed** | Options* |
| 4 | 2,3,4 | A Std 1/4 hp, 115v, 1ph | R std right | 3 Opt 33 fpm | See Option list below |
| 6 | 5,6,7 | B Opt 1/4 hp, 230/460v, 3 ph | L Opt left | 4 Std 44 fpm | - |
| 8 | 8, 9, 10 | C Opt air drive, 1/4 hp @ 50 psi | - | 5 Opt 65 fpm | - |
| 10 | - | D Opt 1/4 hp, 90 vdc variable | - | - | - |
| 12 | - | speed with 115 v, 1 ph control | - | - | - |
*Description of Options: Fill in as many option boxes as required to fully describe conveyor
0 – No Options
5 – Control, 3 ph 1 – Special Length
6 – Sealed 2 – Floor Supports
7 – Special Paint 3 – Sideguides or Hoppers
8 – Other 4 – Control, 1ph
**Drive speeds are variable from 10 fpm or less to the top-rated speed for each of the drive-speed options.
For mechanical drawings of the MagSlide® Low-Profile models click on: magslide pdf
MagSlide® Medium-Duty Conveyors
Frame Widths: 10”, 12”, 15”, 18”.
Guidework: Oil-filled UHMW chain guide provides continuous lubrication; supplemental oil fittings are provided to further extend chain life.
*Magnets: Std ceramic on 12” c/c; Rare Earth magnets and custom centers for special applications.
Sliderbed: 13ga 304SS; optional rigidized (textured) stainless steel available for transfer of oily slugs and scrap.
Sideguides: Std 1” high sideguides; additional chutes, guides, hoppers, tanks and impact plates available upon request.
Drive: Flange-mounted hollow shaft reducer minimizes space and eliminates bulky sprockets and chainguards, std 230/460V, 3ph motor at 30 fpm, 1/4 to l hp; drive can be rotated in 45 degree increments and mounted left or right to avoid nearby obstructions.
*Supports: Std welded floor supports on Type “B” model. Optional casters, floor supports, skid plates, or mobile bases available on all models.
Construction: 12 ga. mild steel frame with machinery enamel paint. Optional epoxy paint and sealed lower frame for submersible applications.
Controls: Optional toggle switch for 1ph drives or starter with pushbuttons for 3ph drives. Controls supplied either mounted and wired or shipped loose.
Chain: Std #60 roller chain.
Take-Up: Automatic spring-loaded chain tensioning.
Configurations: Available in straight and angled-incline configurations
Other Specifications and Options: See Model Designation chart.
Type “A” Horizontal MagSlide®
Type “A” Inclined MagSlide®
MagSlide® Medium-Duty Model Designation
Use this chart to describe the conveyor you need when discussing or selecting options, ordering, or requesting quotes.
| Angle | Width(in) | Type | Drive Type | Drive Side | Drive Speed |
| 0-0º | 10” | A – Straight | A – std 230/460v, 3ph | R – right (std) | 3 – 30 fpm (opt) |
| 1-15º | 12” | B – Incline | B – opt 115/230v, 1ph | L – left (opt) | 4 – 37 fpm (opt) |
| 3-30º | 15” | - | C – opt air drive | - | 5 – 50 fpm (std) |
| 4-45º | 18” | - | D – opt DC var. speed with 115/230V, 1ph | - | 6 – 60 fpm (opt) |
| 6-60º | - | - | SCR controller | - | - |
| 7-75º | - | - | - | - | - |
| 9-90º | - | - | - | - | - |
*For X and Y dimensions, see drawing above, round up to nearest foot in model number and specify exact length in inches. For type “A” conveyors, omit Y dimension.
**Drive speeds are available from 10 fpm or less to the top-rated speed for each of the four drive-speed options.
For mechanical drawings of the MagSlide® Medium-Duty models click on: magslide1 pdf
