Bunting Magnetics

Standard Specifications for Single- and Double-Belt MLC Conveyors

Applications – Use single-belt models for removal of parts or scrap 2’‘ in diameter or larger. Select double-belt models for removal of smaller parts or scrap.
Dimensions – Standard sizes are listed in the table. Special sizes are available on request.
Conveyor construction – 12-gauge CRS formed channel side members with welded cross braces for added strength.
Magnet slider bed – 16 gauge stainless steel slider bed with permanent magnetic platen. Decreasing magnetic force at discharge end provides smooth product release.
Magnetic element/platen – Single-belt model, Single-lane element used on 8’‘ belt model. Dual-lane used on 12’‘ and 18’‘ models. Double-belt model, 4’‘ wide platen on 8’‘ belt, 5 1/2’‘ wide platen on 12’‘ belt, and 11 1/2’‘ wide platen on 18’‘ belt.
Single belt/Double belt – One-piece and two-piece oil and abrasion resistant PVC or urethane belt with stainless steel clipper lacing. Other belts are available on request.
Belt speed – Constant 60 feet per minute speed is standard. Drive can be set to match part rate.
Drive motor – 3/4 hp, 115V, 1 Ph, 60Hz, totally enclosed. Right-angle gearmotor with guarded roller chain drive is standard. Drives can be set to match press speed. Optional motor available.

One-Piece Belt Design

Two-Piece Belt Design