500 S. Spencer Road
P.O. Box 468
Newton, KS 67114-0468
(800) 835-2526
(316) 284-2020
bmc@buntingmagnetics.com

U-Shaped Rectangle Sintered Alnico 2

Part No. A B C D E F Wt. (lbs.) H/F (lbs.) Order Price
SU1602 .281 .750 .375 .135 .250 .188 .015 1.063 $4.89
SU1603 .375 .875 .375 .120 .250 .203 .024 1.438 $11.47

SU1602 *
Tolerances A: ± .005
Min. Tol C: – .020
Max. Tol. E: + .020

U-Shaped Round Sintered Alnico 2

Part No. A B D E F G R Wt. (lbs.) H/F (lbs.) Order Price
SU1606 .400 .202 .114 .099 .098 .130 .086 .005 .438 $10.90
SU1607 .400 .187 .109 .099 .098 .130 .086 .004 .750 $3.08

U-Shaped Round Sintered Alnico 2

Part No. A B D F G Wt. (lbs.) H/F. (lbs.) Order Price
SU1610 .500 .457 .325 .101 .187 .018 1.125 $2.77
SU1611 .500 .442 .317 .101 .187 .017 1.563 $4.15
SU1612 .500 .265 .130 .101 .187 .010 .813 $2.2.44
SU1613 .500 .245 .119 .101 .187 .009 .875 $5.65

Pole faces and back ground

Disc Sintered Alnico 2

Part No. Wt. (lbs.) H/F. (lbs.) Order Price
SD1703 .001 .094 $1.21

Disc Sintered Alnico 2

Part No. Wt. (lbs.) H/F. (lbs.) Order Price
SD1704 .002 .188 $23.06

Magnetized as 2 pole rotor along the diameter

Disc Sintered Alnico 2

Part No. A B C Wt. (lbs.) H/F. (lbs.) Order Price
SD1705 .500 .182 .166 .008 .813 $8.59
SD1706 .510 .105 .128 .005 .438 $2.66

Ground on faces
Poles ground
Magnetized as 2 pole rotor along the diameter

U-Shaped Cast Alnico 2

Part No. A B C D E F Wt. (lbs.) H/F. (lbs.) Order Price
CU634 .492 .177 .185 .374 .157 .283 .013 1.545 $6.37
CU635 .752 .189 .250 .500 .220 .343 .044 4.189 $7.33
CU636 1.000 .189 .315 .626 .220 .343 .110 7.496 $16.14

Pole faces ground

Important notes

  • All Measurements are in inches
  • DOM – Direction of magnetization – indicated by M
  • Unless otherwise specified, magnets will be furnished in magnetized condition
  • Holding forces are approximate. These are average values obtained under laboratory conditions
  • Size, shape, and material of the test piece may affect actual pull forces