Work Faster, Work Safer with Bunting Sheet Fanners
Put an end to manually prying apart oily, sticky, polished or prefinished ferrous sheets. Bunting Permanent Magnetic Sheet Fanners are a faster, safer alternative for handling stacks of sheet stock. They provide a constant, powerful magnetic force that automatically fans sheets apart – without the risk of electrical hazards. Machine operators and robotic arms can reliably and safely remove one sheet at a time, eliminating the chance of “doubles” jamming or damaging your machinery.

Separate Stacked Ferrous Sheets with Permanent Magnetic Power
Inside their rugged, stainless steel housings, Bunting Sheet Fanners use high-energy permanent magnets to separate stacks by inducing like polarities in adjacent sheets, causing magnetic repulsion between them. This repulsion fans the sheets apart. When the top sheet is removed, the next sheet rises to take its place. The distance between the top two sheets will average between 3/4" to 1 1/4", depending on the magnetic strength of the Fanner and the size of the sheets. Fanners can be ganged to handle especially large or heavy-gauge sheets.

Select Standard or New Switchable Fanners*

Standard Sheet Fanners are completely self-contained and come with both predrilled mounting holes for permanent installation and carrying handles for moving between workstations. They are available in two standard face widths and can be stacked one above the other or mounted side-by-side to accommodate a wide range of stack and sheet sizes.

Bunting Switchable Sheet Fanners are available in Generation I and Generation II models, both of which can be “turned off” to avoid accidents while being resupplied with sheets. Both models are patented (U.S. Patent No. 6,481,706) and outfitted with powerful Rare Earth magnets for outstanding separation performance. Both feature reliable pneumatic mechanisms to turn the magnetic field on and off.

Generation I Switchable Sheet Fanners use a pneumatic rotary actuator to control the fanning action by rotating a single-pole Rare Earth magnetic element, which is mounted near the center of the housing. Generation I Switchable Fanners are a compact 4" wide to fit tight spaces and handle lighter loads.

Generation II Switchable Sheet Fanners have a 7" wide face plate and produce a stronger fanning action suited to larger blanks and thicker gauge steel. They use a conventional pneumatic cylinder to rotate a two-pole Rare Earth magnetic element mounted at a pivot point set close to the side of the housing. With this side-pivot geometry, rotating the magnet just 90 degrees faces it toward a built-in shorting circuit to cancel the external field.

* Bunting Rotary Switchable Fanners carry U.S. Patent No. 6,481,706

TEN DAY FREE TRIAL ON BUNTING SHEET FANNERS
We are so sure that the Bunting Sheet Fanner will prove a valuable production aid in your plant that we will ship you a test unit on a 10-day trial basis. If it doesn’t work out, return it and pay only the freight for getting it to you and back.
Excluding Generation I and II Switchable Sheet Fanners.