Standard Specifications for Single- and Double-Belt MLC Conveyors
Applications
- Use single-belt models for removal of parts or scrap 2''
in diameter or larger. Select double-belt models for removal
of smaller parts or scrap.
Dimensions
- Standard sizes are listed in the table. Special sizes are
available on request.
Conveyor construction
- 12-gauge CRS formed channel side members
with welded cross braces for added strength.
Magnet slider bed
- 16 gauge stainless steel slider bed with
permanent magnetic platen. Decreasing magnetic force at discharge
end provides smooth product release.
Magnetic element/platen
- Single-belt model, Single-lane element
used on 8'' belt model. Dual-lane used on 12'' and 18'' models.
Double-belt model, 4'' wide platen on 8'' belt, 5 1/2'' wide
platen on 12'' belt, and 11 1/2'' wide platen on 18'' belt.
Single belt/Double belt
- One-piece and two-piece oil and abrasion
resistant PVC or urethane belt with stainless steel clipper
lacing. Other belts are available on request.
Belt speed
- Constant 60 feet per minute speed is standard.
Drive can be set to match part rate.
Drive motor
- 3/4 hp, 115V, 1 Ph, 60Hz, totally enclosed. Right-angle
gearmotor with guarded roller chain drive is standard. Drives
can be set to match press speed. Optional motor available.
